1. [Track multi cables] Trace and locate RJ45, RJ11,USB,BNC cables;
2.[Hub blink] locating for locating network port by the flashing port light on Hub / Switch.
3. [Track with AC filter] Easily tone trace cable without AC current noise.
4.[Length and Faults location] Measure cable length for RJ45,BNC cable.
5.[Cable continuity] Check open, short, cross for RJ11,RJ45, BNC Cable

NF-810
Wire Tracker
1. Tracking RJ11, RJ45, cables or other metal wire.
2. Check wiremap of Lan cable.
3. Telephone Line Test: Judging TIP or PING line and polarity test.
4. Detect Ethernet network for Power over Ethernet existence.

Underground Wire Locator
1. Helpful-locating & tracking buried and hidden wires
2. Easily locate pet fence wires, metals pipes, electrical wires, etc.
3. Wire tracer range-up to 2.6 feet deep and 1640 feet in length.
4. Power: 9V Alkaline battery (NF817)

1.[POE function] Test the information of standard / non-standard PoE device, such as voltage, polarity, midspan or endspan. 2.[Power & Current ] Test of real-time power, current, voltage consumed by PD devices in PoE power supply systems. 3.[Cable Continuity] Test the open, short, cross status in the network cable. 4.[Loopback] The loop test function of the switch.

1.Start capacity has two modes:quick test /accurate test.
2.Start system load test&Max load test.
3.Use tor all batteries 12V 24V with 100 – 2000 CCA lead-acid batteries.
4.Check the overall health ot the battery including the cranking test,
and run a complete system charging test.

1. Telephone line status detection.
2.Port flash.
3. NCV
4.Led Lighting.
5. Headphones
6.Low battery prompt and charging
7. Cable tracing
8.QC for RJ45 plug crimping quality test

1.[Cable continuity] Check wiring error for STP/UTP, such as open,short, cross connection; 2.[Length and Faults location] Measure length for Lan cable accurately; 3. [Calibration memory] Memory and storage function; 4. [Screen with backlight] Backlight for work in darkness. 5. [Multi remote adaptors] 8 remote units included (only for NF8108-M)

Underground Wire Locator
1. Helpful-locating & tracking buried and hidden wires
2. Easily locate pet fence wires, metals pipes, electrical wires, etc.
3. Wire tracer range-up to 2.6 feet deep and 1640 feet in length.
4. Power: 9V Alkaline battery (NF817)
5. Power: Rechargeable Lithium battery (NF-817L)

1.[3 scan modes] Digital mode/ Analog mode/ PoE mode to locate cable in different situations.
2.[Cable Length measurement] Measure cable length accurately the range is 3~200m. No calibration needed 3.[Voltage detector] Detect AC voltage presence (50V-1000V).
4.[Cable Continuity] Test physical status for STP, UTP lan cable.
5.[Hub blink] Locating network port by the flashing port light on Hub / Switch. and testing transmitting mode and speed of switch.
7.[PoE testing] identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)
8. RJ45 plug crimping checking, Lithium battery for transmitter and receiver